CHECKING THE BATTERY
1. Tension empty exceeding 12.35 volts
2. With the engine switched on lights, fans, thermal lunette (10 and 20 amps), the battery voltage has mantenerce above the 10.5 volts after a minute of operation.
3. Cut the power consumption of battery voltage has to rise to 11.95 d at least one minute.
4. Operate the starter motor tension does not drop below 9.50 volts. Temperature with low temperatures admits to 8.50 volts.
5. Scheme even with the engine rpm of 3000 to provide a load of approximately 10 amps the voltage should be stabilized between 13.80 and 14.40 volts as the battery is charging, the flow is stable over 1 amp
1. Tension empty exceeding 12.35 volts
2. With the engine switched on lights, fans, thermal lunette (10 and 20 amps), the battery voltage has mantenerce above the 10.5 volts after a minute of operation.
3. Cut the power consumption of battery voltage has to rise to 11.95 d at least one minute.
4. Operate the starter motor tension does not drop below 9.50 volts. Temperature with low temperatures admits to 8.50 volts.
5. Scheme even with the engine rpm of 3000 to provide a load of approximately 10 amps the voltage should be stabilized between 13.80 and 14.40 volts as the battery is charging, the flow is stable over 1 amp
No hay comentarios:
Publicar un comentario